SIG Application
3 posters
Page 1 of 1
SIG Application
Type of gun:SIG SG-552
What type of ammo:5.56mm
Any Modifcations:Scope,Bottom Rail,Extended Magazine
What is your class(If you have one):I was old sniper and have gone back to riflemen still training snipers as my officer position
History on the gun:In 1978, the Swiss Army formulated requirements for a successor to the Stgw 57 battle rifle (known commercially as the SG 510) using the 7.5×55mm Schmidt Rubin cartridge. Emphasis was placed on modularity; the weapon family was to include several variants of the base design, including a compact carbine that would be issued to rear-echelon and support troops, commanding staff, vehicle crews, special operations personnel and paratroopers. Another aim was to reduce the overall weight of the rifle while retaining comparable or improved accuracy out to 300 m. The solicitation was narrowed down to two designs: the W+F C42 (developed by the state-owned Waffenfabrik Bern, using both 6.45×48mm and 5.6×45mm cartridges) and the SG 541 (developed by SIG). In 1981, the experimental 6.45mm GP 80 cartridge was rejected in favor of the more conventional 5.6×45mm GP 90 round (with a 4.1 g, steel-jacketed, lead core projectile) that is the Swiss equivalent to NATO's standard 5.56×45mm cartridge.
[edit]Production
In February 1983, the decision to adopt the SG 541 was publicly announced (the designation of the rifle was changed in October of the following year to SG 550, while the carbine version became known as the SG 551). The rifle was officially accepted into service in 1990, hence the military designation Stgw 90. Over 600,000 rifles have been delivered since then and production for the military has now ceased.The SG 550 is a selective fire 5.56×45mm NATO assault rifle firing from a closed bolt. It has a gas-actuated piston-driven long stroke operating system derived from the SIG SG 540 series of rifles, which uses burnt powder gases vented through a port in the barrel to power the weapon's moving parts. Once inside the gas cylinder, propellant gases pass through an L-shaped channel machined in the piston head and are directed forward towards the gas valve. The pressure build-up in front of the piston head pushes the piston and bolt carrier rearward. As the piston is driven back, the gas port and the L-shaped channel move out of alignment, cutting off the supply of gas to the cylinder. Surplus gas and powder residues are evacuated through an exhaust port in the gas cylinder. This system ensures that only the precise volume of gas required to overcome the mass and resistance of the rifle's moving assembly is admitted from the barrel. The manually adjustable gas valve has two settings, one for normal operation, and the second setting for use in the presence of heavy fouling or icing.
The rotary bolt locking mechanism consists of two steel locking lugs that engage locking recesses in the breech, and is identical to that used in the SG 540. A spring-loaded extractor is incorporated into the bolt while a fixed protrusion on one of the receiver's internal guide rails ejects the spent cartridge casings.
What type of ammo:5.56mm
Any Modifcations:Scope,Bottom Rail,Extended Magazine
What is your class(If you have one):I was old sniper and have gone back to riflemen still training snipers as my officer position
History on the gun:In 1978, the Swiss Army formulated requirements for a successor to the Stgw 57 battle rifle (known commercially as the SG 510) using the 7.5×55mm Schmidt Rubin cartridge. Emphasis was placed on modularity; the weapon family was to include several variants of the base design, including a compact carbine that would be issued to rear-echelon and support troops, commanding staff, vehicle crews, special operations personnel and paratroopers. Another aim was to reduce the overall weight of the rifle while retaining comparable or improved accuracy out to 300 m. The solicitation was narrowed down to two designs: the W+F C42 (developed by the state-owned Waffenfabrik Bern, using both 6.45×48mm and 5.6×45mm cartridges) and the SG 541 (developed by SIG). In 1981, the experimental 6.45mm GP 80 cartridge was rejected in favor of the more conventional 5.6×45mm GP 90 round (with a 4.1 g, steel-jacketed, lead core projectile) that is the Swiss equivalent to NATO's standard 5.56×45mm cartridge.
[edit]Production
In February 1983, the decision to adopt the SG 541 was publicly announced (the designation of the rifle was changed in October of the following year to SG 550, while the carbine version became known as the SG 551). The rifle was officially accepted into service in 1990, hence the military designation Stgw 90. Over 600,000 rifles have been delivered since then and production for the military has now ceased.The SG 550 is a selective fire 5.56×45mm NATO assault rifle firing from a closed bolt. It has a gas-actuated piston-driven long stroke operating system derived from the SIG SG 540 series of rifles, which uses burnt powder gases vented through a port in the barrel to power the weapon's moving parts. Once inside the gas cylinder, propellant gases pass through an L-shaped channel machined in the piston head and are directed forward towards the gas valve. The pressure build-up in front of the piston head pushes the piston and bolt carrier rearward. As the piston is driven back, the gas port and the L-shaped channel move out of alignment, cutting off the supply of gas to the cylinder. Surplus gas and powder residues are evacuated through an exhaust port in the gas cylinder. This system ensures that only the precise volume of gas required to overcome the mass and resistance of the rifle's moving assembly is admitted from the barrel. The manually adjustable gas valve has two settings, one for normal operation, and the second setting for use in the presence of heavy fouling or icing.
The rotary bolt locking mechanism consists of two steel locking lugs that engage locking recesses in the breech, and is identical to that used in the SG 540. A spring-loaded extractor is incorporated into the bolt while a fixed protrusion on one of the receiver's internal guide rails ejects the spent cartridge casings.
1stLt Chris Harring- Posts : 9
Join date : 2012-03-31
Location : Florida
Re: SIG Application
Accecpted.
General Sillykilla- Posts : 28
Join date : 2012-04-01
Age : 34
Location : New Jersey
Similar topics
» Deathfromabove's F.R.A.G. Application
» Jeremy Johnson Application
» Armored Application
» leelee1411's Application
» Application Format
» Jeremy Johnson Application
» Armored Application
» leelee1411's Application
» Application Format
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|